1. Os X Hold For Authentication Free
2. Os X Hold For Authentication On Iphone

This article is intended for system administrators who set security policy in enterprise environments that require smart card authentication.

Enable smart card-only login

Make sure that you carefully follow these steps to ensure that users will be able to log in to the computer.

For MD5 authentication you need different commands. First use ip ospf message-digest-key X md5 to specify the key number and a password. It doesn’t matter which key number you choose but it has to be the same on both ends. To enable OSPF authentication you need to type in ip ospf authentication. Step 1: Try to print something to this printer. Then open the print queue for the printer, and click on the refresh (curly-arrow) icon to the right of the job name. It should prompt you for your username and password for the print server, and then revert to 'Hold for authentication'. This is really important. After reboot, try printing again to the printer and the authentication window will popup prompting for your network username and password. Enter your username and network password and ensure the “Remember this password in my keychain” checkbox is checked (otherwise you will have to enter your credentials every time you need to print).

1. Pair a smart card to an admin user account or configure Attribute Matching.
2. If you’ve enabled strict certificate checks, install any root certificates or intermediates that are required.
3. Confirm that you can log in to an administrator account using a smart card.
4. Install a smart-card configuration profile that includes '<key>enforceSmartCard</key><true/>,' as shown in the smart card-only configuration profile below.
5. Confirm that you can still log in using a smart card.

Three types of authentication are most common: Local user authentication. Verifying a user’s identity is usually performed by the operating system as the first step in authorization. If your code is running as a normal user, the operating system limits what your code can do based on that user’s permissions. College of FAA: Mac OS X - Print Job 'On Hold (Authentication required)' Overview. This article explains how to fix a printer connection on Mac OS X in which jobs get paused and are listed as 'On Hold (Authentication required)'.

For more information about smart card payload settings, see the Apple Configuration Profile Reference.

For more information about using smart card services, see the macOS Deployment Guide or open Terminal and enter man SmartCardServices.

Disable smart card-only authentication

If you manually manage the profiles that are installed on the computer, you can remove the smart card-only profile in two ways. You can use the Profiles pane of System Preferences, or you can use the /usr/bin/profiles command-line tool. For more information, open Terminal and enter man profiles.

If your client computers are enrolled in Mobile Device Management (MDM), you can restore password-based authentication. To do this, remove the smart card configuration profile that enables the smart card-only restriction from the client computers.

To prevent users from being locked out of their account, remove the enforceSmartCard profile before you unpair a smart card or disable attribute matching. If a user is locked out of their account, remove the configuration profile to fix the issue.

If you apply the smart card-only policy before you enable smart card-only authentication, a user can get locked out of their computer. To fix this issue, remove the smart card-only policy:

1. Turn on your Mac, then immediately press and hold Command-R to start up from macOS Recovery. Release the keys when you see the Apple logo, a spinning globe, or a prompt for a firmware password.
   
2. Select Disk Utility from the Utilities window, then click Continue.
   
3. From the Disk Utility sidebar, select the volume that you're using, then choose File > Mount from the menu bar. (If the volume is already mounted, this option is dimmed.) Then enter your administrator password when prompted.
4. Quit Disk Utility.
5. Choose Terminal from the Utilities menu in the menu bar.
6. Delete the Configuration Profile Repository. To do this, open Terminal and enter the following commands.
   In these commands, replace <volumename> with the name of the macOS volume where the profile settings were installed.
   rm /Volumes/<volumename>/var/db/ConfigurationProfiles/MDM_ComputerPrefs.plist
rm /Volumes/<volumename>/var/db/ConfigurationProfiles/.profilesAreInstalled
rm /Volumes/<volumename>/var/db/ConfigurationProfiles/Settings/.profilesAreInstalled
rm /Volumes/<volumename>/var/db/ConfigurationProfiles/Store/ConfigProfiles.binary
rm /Volumes/<volumename>/var/db/ConfigurationProfiles/Setup/.profileSetupDone
7. When done, choose Apple () menu > Restart.
8. Reinstall all the configuration profiles that existed before you enabled smart card-only authentication.

Configure Secure Shell Daemon (SSHD) to support smart card-only authentication

Users can use their smart card to authenticate over SSH to the local computer or to remote computers that are correctly configured. Follow these steps to configure SSHD on a computer so that it supports smart card authentication.

Update the /etc/ssh/sshd_config file:

1. Use the following command to back up the sshd_config file:
   sudo cp /etc/ssh/sshd_config /etc/ssh/sshd_config_backup_`date '+%Y-%m-%d_%H:%M'`
   
2. In the sshd_config file, change '#ChallengeResponseAuthentication yes' to 'ChallengeResponseAuthentication no' and change '#PasswordAuthentication yes' to '#PasswordAuthentication no.'

Then, use the following commands to restart SSHD:

sudo launchctl stop com.openssh.sshd

sudo launchctl start com.openssh.sshd

If a user wants to authenticate SSH sessions using a smart card, have them follow these steps:

1. Use the following command to export the public key from their smart card:
   ssh-keygen -D /usr/lib/ssh-keychain.dylib
2. Add the public key from the previous step to the ~/.ssh/authorized_keys file on the target computer.
3. Use the following command to back up the ssh_config file:
   sudo cp /etc/ssh/ssh_config /etc/ssh/ssh_config_backup_`date '+%Y-%m-%d_%H:%M'`
4. In the/etc/ssh/ssh_config file, add the line 'PKCS11Provider=/usr/lib/ssh-keychain.dylib.'
   

If the user wants to, they can also use the following command to add the private key to their ssh-agent:

Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic forum and Apple can therefore provide no guarantee as to the efficacy of any proposed solutions on the community forums. Canon lbp 2900 for mac os high sierra.

Without an editor dedicated to the task, it is also often cumbersome, overwhelming, and repetitive. Textmate for mac os sierra. Especially when you are dealing with a lot of files at once — like most projects do.

ssh-add -s /usr/lib/ssh-keychain.dylib

Enable smart card-only for the SUDO command

Use the following command to back up the /etc/pam.d/sudo file:

sudo cp /etc/pam.d/sudo /etc/pam.d/sudo_backup_`date '+%Y-%m-%d_%H:%M'`

Then, replace all of the contents of the /etc/pam.d/sudo file with the following text:

Enable smart card-only for the LOGIN command

Use the following command to back up the /etc/pam.d/login file:

sudo cp /etc/pam.d/login /etc/pam.d/login_backup_`date '+%Y-%m-%d_%H:%M'`

Then, replace all of the contents of the/etc/pam.d/login file with the following text:

Enable smart card-only for the SU command

Use the following command to back up the /etc/pam.d/su file:

sudo cp /etc/pam.d/su /etc/pam.d/su_backup_`date '+%Y-%m-%d_%H:%M'`

Then, replace all of the contents of the/etc/pam.d/su file with the following text:

Os X Hold For Authentication Free

Sample smart card-only configuration profile

Os X Hold For Authentication On Iphone

Here’s a sample smart card-only configuration profile. You can use it to see the kinds of keys and strings that this type of profile includes.